The 5-inch IPS TFT LCD is a 262K color display screen with a diagonal size of 5 inches and a resolution of 800 * 480 dot matrix. This product adopts IPS (In Plane Switching) display technology, providing ultra wide viewing angles to ensure users receive a consistent visual experience from different angles. This display screen supports single point RTP and multi-point CTP touch technology, achieving intuitive human-computer interaction.
The 5-inch IPS TFT LCD is a high-definition display screen with RGB interface. Its working logic voltage is 16.8V, with a built-in ST7262 driver IC and a working temperature of -30+85C.
The 5-inch IPS TFT LCD display screen is widely used in outdoor high brightness equipment display, electric vehicle dashboard, motorcycle dashboard display, freezing monitoring equipment display, etc. due to its excellent performance and wide range of application scenarios. It has become an indispensable part of consumer electronics products. It can provide exciting visual experiences, meet users' needs for image display, and support customized services to meet specific application requirements.
Features
Size: 5 inches
Resolution: 800*480 pixels
Display mode: IPS
Driver IC: ST7262
Brightness: 1500cd/m ²
Interface types: RGB
Working temperature: -30 ℃ to 85 ℃
Storage temperature: -30 ℃ to 85 ℃
Backlight type: LED backlight, brightness and quantity vary by model
Outline Drawing
Module Function Description
| Pin No. | Symbol | Description |
| 1 | LEDK | POWER SUPPLY- FOR BACKLIGHT cathode |
| 2 | LEDA | POWER SUPPLY+ FOR BACKLIGHT ANODE |
| 3 | GND | GND |
| 4 | VDD | POWER SUPPLY |
| 5~12 | R0~R7 | 8 bit data bus display red data. |
| 13~20 | G0~G7 | 8 bit data bus display green data |
| 21~28 | B0~B7 | 8 bit data bus display blue data |
| 29 | GND | GND |
| 30 | DCLK | Pixel clock signal in RGB I/F |
| 31 | DISP | DISP=0:Standby mode (Default),DISP=1:Normal display mode |
| 32 | HSYNC | Horizontal sync. Signal in RGB I/F |
| 33 | VSYNC | Vertical sync. Signal in RGB I/F |
| 34 | DE | Data enable signal in RGB I/F mode 1 |
| 35 | NC | NC |
| 36 | GND | GND |
| 37 | XR(NC) | NC |
| 38 | YD(NC) | NC |
| 39 | XL(NC) | NC |
| 40 | YU(NC) | NC |
Back-Light Unit Characeristics
The back-light system is an edge-lighting type with 18 white LEDs. The characteristics of the back-light are shown in the following tables.
| Characteristics | Symbol | Min. | Type | Max. | Unit | Notes |
| Forward Voltage | VF | 16.5 | -- | 17.4 | V | -- |
| Forward current | IF | -- | 120 | -- | mA | -- |
| Luminance(With LCD) | Lv | -- | 1500 | -- | cd/m2 | -- |
| LED life time | N/A | -- | 20,000 | -- | Hr | Note 1 |
Note:
- The “LED life time” is defined as the module brightness decrease to 50% of original brightness at IL=20mA/LED. The LED life time could be decreased if operating IL is larger than 25mA/LED.
Optical Specification
Reliability Test Item
| No. | Test Item | Test Condition | Notes |
| 1 | High Temp. Storage | +85°C / 240H | 1. Functional test isOK. Missing Segment,short, unclear segment non-display,display abnormally and liquid crystal leakare un-allowed. 2. No low temperature bubbles,end seal loose andfall, frame rainbow. |
| 2 | Low Temp. Storage | -30°C / 240H |
| 3 | High Tempe. Operating | +85°C / 240H |
| 4 | Low Tempe. Operating | -30°C / 240H |
| 5 | High Temperature /Humidity storage | 60+5°C x 90%RH / 240H |
| 6 | Thermal and cold shock | Static state, -30℃(30min) ~85℃ (30min),50 cycles |
Product Image
Factory Facilities and Certificates
